Join the 80,000 other DTN customers who enjoy the fastest, most reliable data available. There is no better value than DTN!

(Move your cursor to this area to pause scrolling)




"I am keeping IQFeed, much better reliabilty than *******. I may refer a few other people in the office to switch as well." - Comment from Don
"Thanks for the great product and support. During this week of high volume trading, my QuoteTracker + IQ Feed setup never missed a beat. Also, thanks for your swiftness in responding to data issues. I was on ******* for a few years before I made the switch over early this year, and wish I had done it a long time ago." - Comment from Ken
"Very impressed with the quality of your feed - ******* is a real donkey in comparison." - Comment from A.C. via Email
"I've been using IQFeed 4 in a multi-threaded situation for the last week or two on 2600 symbols or so with 100 simultaneous daily charts, and I have had 100% responsiveness." - Comment from Scott
"I was on the phone with a friend who uses CQG and right after the Fed announcement, CQG was as much as 30 seconds behind DTN.IQ. Some quotes were off by as much as 15-18 cents. Your feed never missed a beat." - Comment from Roger
"DTN has never given me problems. It is incredibly stable. In fact I've occasionally lost the data feed from Interactive Brokers, but still been able to trade because I'm getting good data from DTN." - Comment from Leighton
"I have been using IQFeed now for a few years in MultiCharts and I have zero complaints. Very, very rare to have any data hiccups or anything at all go wrong." - Comment from Public Forum
"I like you guys better than *******...much more stable and a whole lot fewer issues." - Comment from Philip
"I've been using Neoticker RT with IQFeed for two months, and I'm very happy with both of the products (I've had IQFeed for two years with very few complaints). The service from both companies is exceptional." - Comment from Public Forum
"If you are serious about your trading I would not rely on IB data for serious daytrading. Took me a while to justify the cost of IQ Feed and in the end, it's just a 2 point stop on ES. Better safe than sorry" - Comment from Public Forum
Home  Search  Register  Login  Recent Posts
Information on DTN's Industries:
DTN Oil & Gas | DTN Trading | DTN Agriculture | DTN Weather
Follow DTNMarkets on Twitter
DTN.IQ/IQFeed on Twitter
DTN News and Analysis on Twitter
Viewing User Profile for: tradeworks
About Contact
Joined: May 11, 2006 03:58 PM
Last Post: Aug 13, 2009 01:19 PM
Last Visit: Feb 13, 2013 02:14 PM
Website: http://www.mechtrading.com
Location:
Occupation:
Interests:
Email: tradeworks@mechtrading.com
AIM:
ICQ:
MSN IM:
Yahoo IM:
Post Statistics
tradeworks has contributed to 5 posts out of 21199 total posts (0.02%) in 6,570 days (0.00 posts per day).

20 Most recent posts:
IQFeed Developer Support » streaming historical data? Aug 13, 2009 01:19 PM (Total replies: 3)

Quote: Is it possible to get streaming historical data in iqfeed? I just need to get a 1 min interval OHLC data in real time and retrieveing historical data is not effecient.
--- Original message by rcfcu on Aug 6, 2009 11:47 AM
You can do this using QCollector For DTN IQFeed.

http://www.mechtrading.com/qcollector/dtn/index.htm

IQFeed 3rd Party Software Support » QCollector Error May 10, 2007 10:17 AM (Total replies: 10)

Quote: Thank you. I sent them an inquiry a few days ago but have not heard back.

MSS
--- Original message by mss on May 9, 2007 11:55 AM
A response to your question was sent to you on Monday. Perhaps you don't have your email filters set up correctly? You should see a message with subject "Re: Tradeworks Software feedback".

In any case, let me respond again here.:

1. I'm not sure what you mean by "cannot load QCollector". Do you mean the program won't start up? Are you seeing any error messages?

2. I suggest you go to our web site at
http://www.mechtrading.com/qcollector/dtn/download.htm and install the latest version of QCollector For DTN IQFeed.

I haven't received any other reports of problems running QCollector with the new release of the IQFeed client software.

Regards,

Dave DeLuca
Tradeworks Software
http://www.mechtrading.com

IQFeed 3rd Party Software Support » Qcollector - No seconds time stamp !! Apr 17, 2007 03:21 PM (Total replies: 4)

As the developer of QCollector For DTN IQFeed I can say that QCollector has been tested against the new server configuration supporting the seconds in the time stamps for historical and real-time tick data and performed perfectly.

The next release of QCollector For DTN IQFeed will fully support the new data feed features when they are rolled out.

Regards,

Dave DeLuca
Tradeworks Software
http://www.mechtrading.com

IQFeed 3rd Party Software Support » ANN: QCollector For DTN IQFeed May 30, 2006 02:29 PM (Total replies: 6)

A new build of QCollector For DTN IQFeed has been released.

* This is a fully enabled build with no license key required. Download data for any DTN IQFeed symbol.

* Advance orders now accepted - save $50.

Read more >> http://www.mechtrading.com/qcollector/dtn/download.htm

IQFeed 3rd Party Software Support » ANN: QCollector For DTN IQFeed May 11, 2006 05:21 PM (Total replies: 6)

This post is to announce the release of QCollector For DTN for beta testing.

QCollector For DTN lets IQFeed subscribers download data for stocks, futures, options and indexes and save the data to files on their computer. The downloaded data can then be used in other trading programs for technical analysis, charting and scanning, or running and testing trading systems. No need to subscribe to additional data services for historical data.

You can download a free copy of QCollector For DTN from the Tradeworks Software web site at http://www.mechtrading.com/qcollector/dtn/download.htm

QCollector For DTN Features

  • Download intra-day or end-of-day data; select monthly, weekly, daily, intraday minutes or time and sales.

  • Download and save historical data for any symbol including Forex.

  • Save your data in ASCII text format or in the popular MetaStock data format for compatibility with many other trading programs.

  • Create portfolios of securities to simplify file management tasks.

  • Import lists of symbols into your QCollector portfolios.

  • Run timed updates during the trading session to keep your data files updated with the latest real-time data from IQFeed. Set the timed update frequency to run as often as every five seconds on hundreds of symbols.

  • Run a regular download at any time of day or night. All data files are updated using the most recent data available.

  • Schedule tasks to have QCollector automatically bring all your data files up to date.
    Create tasks to update individual portfolios, start timed udpates, and more.

  • Many more features, including data export, conversion to MetaStock format, and more.

Time: Sun May 5, 2024 4:36 PM CFBB v1.2.0 8 ms.
© AderSoftware 2002-2003