Join the 80,000 other DTN customers who enjoy the fastest, most reliable data available. There is no better value than DTN!

(Move your cursor to this area to pause scrolling)




"I just wanted to tell you what a fine job you have been doing. While *******, from what I hear, has been down and out, off and on, IQ feed has held like a champ this week." - Comment from Shirin
"Everything is working great ! Very impressive client. The news refreshes better and is more pertinent than the ******* feed I paid $ 100/month for. I Also like the charts a lot." - Comment from Leon
"Thanks for the great product and support. During this week of high volume trading, my QuoteTracker + IQ Feed setup never missed a beat. Also, thanks for your swiftness in responding to data issues. I was on ******* for a few years before I made the switch over early this year, and wish I had done it a long time ago." - Comment from Ken
"I was on the phone with a friend who uses CQG and right after the Fed announcement, CQG was as much as 30 seconds behind DTN.IQ. Some quotes were off by as much as 15-18 cents. Your feed never missed a beat." - Comment from Roger
"I started a trial a few weeks back before the market went wild. DTN.IQ didn’t miss anything and beat my other provider. I decided to stay with you because of the great service through all the volatility." - Comment from Mike
"My broker in Davenport suggested I give you a try as he uses your service and says its the best." - Comment from Bill via RT Chat
"I'm very glad I switched to IQFeed. It's working perfectly with no lag, even during fast market conditions." - Comment from Andy via Email
"I've been using Neoticker RT with IQFeed for two months, and I'm very happy with both of the products (I've had IQFeed for two years with very few complaints). The service from both companies is exceptional." - Comment from Public Forum
"DTN feed was the only feed that consistently matched Bloomberg feed for BID/ASK data verification work these past years......DTN feed is a must for my supply & demand based trading using Cumulative Delta" - Comment from Public Forum Post
"I've been using IQFeed 4 in a multi-threaded situation for the last week or two on 2600 symbols or so with 100 simultaneous daily charts, and I have had 100% responsiveness." - Comment from Scott
Home  Search  Register  Login  Recent Posts
Information on DTN's Industries:
DTN Oil & Gas | DTN Trading | DTN Agriculture | DTN Weather
Follow DTNMarkets on Twitter
DTN.IQ/IQFeed on Twitter
DTN News and Analysis on Twitter
Viewing User Profile for: keohir808
About Contact
Joined: Sep 16, 2019 10:45 AM
Last Post: Jan 30, 2022 08:45 PM
Last Visit: Jan 30, 2022 10:12 PM
Website:  
Location:
Occupation: Software Developer
Interests: Machine Learning, Python, Java.
AIM:
ICQ:
MSN IM:
Yahoo IM:
Post Statistics
keohir808 has contributed to 6 posts out of 21185 total posts (0.03%) in 1,679 days (0.00 posts per day).

20 Most recent posts:
Miscellaneous Messages » Machine learning and tick-by-tick data Jan 30, 2022 08:45 PM (Total replies: 1)

There seems to be a lack of research regarding the use of tick-by-tick data as input to machine learning models. Has anyone experimented with machine learning and tick-by-tick data? I’ve trained an LSTM with about 2 years worth using tick-by-tick data with DTN which fit a certain criteria such as float, volume, price. The result is a model with around 69.9% accuracy. A naïve model which predicts that the bid price will be the same price as the last tick has an accuracy of around 65%. I’m wondering if I can increase my model’s accuracy through feature engineering. Could anyone share research papers regarding machine learning and tick-by-tick data? Does anyone have any insight regarding data transformations that can be applied to financial data which may result in increased accuracy if used as a feature in machine learning models?

Interests & Tools: Machine Learning, Neural Networks, Deep Learning, Python, Java, Trading, Small Caps, Interactive Brokers.
Edited by keohir808 on Jan 30, 2022 at 08:50 PM

IQFeed Developer Support » HTT - high,close,open etc. Feb 29, 2020 06:48 PM (Total replies: 0)

For historical data, is there a way to retrieve the high,low,open,close for each trade returned by the HTT command?

For example, when level 1 data is streamed, the Update/Message data contains data such as the high,low,open,close for each trade.




Interests & Tools: Java, Trading, Small Caps, Interactive Brokers.
Edited by keohir808 on Feb 29, 2020 at 07:06 PM

IQFeed Developer Support » Derivative Data - Forming 5 minute chart. Sep 23, 2019 04:02 PM (Total replies: 1)

Please disregard. It was an error on my part.
Java, Trading, Small Caps, Interactive Brokers.

IQFeed Developer Support » Derivative Data - Forming 5 minute chart. Sep 20, 2019 04:14 PM (Total replies: 1)

Hello, had a question about forming 5 minute bar charts with the BW command. Let's say I send this input:

BW,AMD,300,20190920 150000,,,,160000,,s,,1


Where:

[Interval] is 300
[BeginDate BeginTime] is 20190920 150000
[EndFilterTime] is 160000

I noticed that the output is:

 
BH,AMD,2019-09-20 15:10:00,29.9916,30.0100,29.9603,29.9900,40499085,186030,0,
BH,AMD,2019-09-20 15:20:00,29.9910,30.0499,29.9850,30.0268,41155771,306028,0,
BH,AMD,2019-09-20 15:30:00,30.0401,30.0500,30.0100,30.0300,41785831,299608,0,
BH,AMD,2019-09-20 15:40:00,29.9700,29.9900,29.9600,29.9850,42484285,275326,0,
BH,AMD,2019-09-20 15:50:00,29.9700,29.9750,29.8600,29.8850,43546108,641482,0,
BH,AMD,2019-09-20 16:00:00,29.9900,30.0800,29.9750,30.0400,47936227,3503308,0,


The data is being sent back in increments of 10 minutes. E.g.

15:10:00, 15:20:00, 15:30:00, 15:40:00, ...

Shouldn't it instead be returning data in increments of 5 minutes since 300 was specified as the interval? E.g.

15:05:00, 15:10:00, 15:15:00, 15:20:00, 15:25:00, ...
Edited by keohir808 on Sep 20, 2019 at 04:50 PM

IQFeed Developer Support » Most Recent Trade Aggressor blank Sep 18, 2019 08:40 AM (Total replies: 2)

I thought that possibly, the cause was because I was on trial, but it looks like after I subscribed to data, the most recent trade aggressor field still returns empty.
Edited by keohir808 on Sep 18, 2019 at 09:08 AM

IQFeed Developer Support » Most Recent Trade Aggressor blank Sep 16, 2019 10:52 AM (Total replies: 2)

Hello, I noticed that the "most recent trade aggressor" field always seems to be empty.

The output:

echo: S,SERVER DISCONNECTED
echo: S,CURRENT PROTOCOL,6.1,
echo: S,CURRENT UPDATE FIELDNAMES,Symbol,Bid,Ask,Spread,Most Recent Trade,Most Recent Trade Size,Most Recent Trade Aggressor
echo: S,SERVER CONNECTED
echo: S,CUST,real_time,66.112.156.223,60004,V7Cm0mvJNxcYEwJ,6.1.0.20,0, TRIAL NYSE NASDAQ-L2 NASDAQ L2_SERV AMEX RT_TRADER COMTEX PRIMEZONE DTNNEWS SCROLLNEWS EXFUND BENZINGA INDEX L2 ,Z3TRL1O122Ab1X2Ag1D2DE2EF1a,500,QT_API,20190918,
echo: P,YUMA,5.3600,5.3800,0.0200,5.3782,5,,
echo: Q,YUMA,5.3600,5.3700,0.0100,5.3782,5,,
echo: Q,YUMA,5.3500,5.3700,0.0200,5.3782,5,,
echo: Q,YUMA,5.3500,5.3700,0.0200,5.3782,5,,
echo: Q,YUMA,5.3500,5.3700,0.0200,5.3782,5,,

Looking at the IQFeed Connection Manager, I see IQFeed Version: 6.1.0.20

I see this field is described as, "Limited exchanges - Provided by the exchange or 3rd party data provider". Could this be the reason? I can't seem to find an exchange or a stock where the "Most Recent Trade Aggressor" field doesn't return empty.
Edited by keohir808 on Sep 16, 2019 at 09:16 PM


Time: Sat April 20, 2024 4:27 AM CFBB v1.2.0 13 ms.
© AderSoftware 2002-2003