Join the 80,000 other DTN customers who enjoy the fastest, most reliable data available. There is no better value than DTN!

(Move your cursor to this area to pause scrolling)




"Previously I was using *******. IQFeed is WAY more economical, and for my charting needs is just as good, if not better." - Comment from Public Forum Post
"I've never had DTN go out on me since switching. ******* would go down a couple times every month when I was using them." - Comment from Bryce in AL.
"I just wanted to tell you what a fine job you have been doing. While *******, from what I hear, has been down and out, off and on, IQ feed has held like a champ this week." - Comment from Shirin
"There is no doubt that IQFeed is the best data provider. I am very satisfied with your services. And IQFeed is the only one that I would recommend to my friends. Now, most of them are using your product in China." - Comment from Zhezhe
"Just a quick one to say I'm very impressed so far :) The documentation for developers is excellent and I've quickly managed to get an app written to do historical downloads. The system is very robust and pretty quick considering the extent of data that's available. The support guys have been very helpful too, in combination with the forums it's been plain sailing so far!" - Comment from Adam
"Excellent datafeed !!!" - Comment from Arely
"You have an excellent product !!!!!!" - Comment from Arely
"Awesome response, as usual. It is a sincere and refreshing pleasure to do business with DTN, compared to your competition." - Comment from Ryan
"I'm satisfied with IQFeed. It's the most reliable and fastest quote feed I have ever used. Although I'm a resident in China, it's still very fast!" - Comment from Xiaofei
"I ran your IQFeed DDE vs. my broker vs. a level II window for some slow-moving options. I would see the level II quote change, then your feed update instantaneously. My broker's DDE, however, would take as much as 30 seconds to update. I am not chasing milliseconds, but half a minute is unacceptable." - Comment from Rob
Home  Search  Register  Login  Recent Posts
Information on DTN's Industries:
DTN Oil & Gas | DTN Trading | DTN Agriculture | DTN Weather
Follow DTNMarkets on Twitter
DTN.IQ/IQFeed on Twitter
DTN News and Analysis on Twitter
Viewing User Profile for: themike
About Contact
Joined: Jul 10, 2010 11:45 PM
Last Post: Jul 18, 2010 06:14 PM
Last Visit: Sep 7, 2010 11:42 AM
Website:  
Location:
Occupation:
Interests:
AIM:
ICQ:
MSN IM:
Yahoo IM:
Post Statistics
themike has contributed to 3 posts out of 21185 total posts (0.01%) in 5,039 days (0.00 posts per day).

20 Most recent posts:
DTN Satellite Products » DTN satellite reciever usb support on Windows 7 (x64) Jul 18, 2010 06:14 PM (Total replies: 3)

Thanks to everyone at DTN for helping with this issue. The fix was to reload the machine with a 32-bit edition of Window 7. Apparently this is a common problem with lots of older hardware devices that lack new drivers for a 64-bit OS.

DTN Satellite Products » DTN satellite reciever usb support on Windows 7 (x64) Jul 11, 2010 04:17 PM (Total replies: 3)

I checked and it is a DVB-SR1 receiver.

DTN Satellite Products » DTN satellite reciever usb support on Windows 7 (x64) Jul 11, 2010 12:08 AM (Total replies: 3)

I have a DTN dish/receiver that is used for DTN Meteorlogix. Previously the host PC was rented from DTN (it was an 8-9 year old Dell optiplex/Win2k). The decision was made to purchase a new PC in leiu continuing to rent. Unfortunately, the new PC has Windows 7 64bit edition loaded on it.

Per instructions from tech support I downloaded AviationSentry from ftp.meteorlogix.com/pub/temp/AVS5.01.050610/

The issue is that I cannot get the USB device driver for the receiver (Velocity/DtnRcUsb.sys) to load. Is this device even supported on Windows 7?

I am not sure of the receiver model is at the moment, but I know that it in addition to USB, it also has an Ethernet and a serial (8P8C) connector on the back.

I have also been unable to find any information on how to use the Ethernet connection. I assume that a certain IP/netmask will need to be statically assigned on the host PC.

I apologize if this is not the proper forum to ask these questions. Any information or links on how to complete the setup would be most appreciated.


Time: Thu April 25, 2024 2:48 AM CFBB v1.2.0 6 ms.
© AderSoftware 2002-2003